For many years there seemed to be only one reliable solution to keep info on your computer – by using a hard drive (HDD). Then again, this type of technology is currently displaying it’s age – hard disks are noisy and sluggish; they’re power–hungry and frequently create quite a lot of heat throughout intense procedures.

SSD drives, on the contrary, are quick, consume far less energy and tend to be far less hot. They provide a completely new method of file accessibility and data storage and are years in front of HDDs when it comes to file read/write speed, I/O effectiveness and power efficacy. Find out how HDDs stand up against the newer SSD drives.

1. Access Time

SSD drives have a completely new & progressive method of data safe–keeping based on the usage of electronic interfaces in place of any sort of moving parts and turning disks. This brand new technology is faster, making it possible for a 0.1 millisecond file accessibility time.

The technology behind HDD drives goes back to 1954. And while it’s been substantially enhanced throughout the years, it’s nevertheless can’t stand up to the ground breaking concept behind SSD drives. With today’s HDD drives, the best data file access rate you’re able to attain may differ somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

The random I/O performance is really important for the overall performance of any data storage device. We have executed detailed exams and have determined that an SSD can deal with a minimum of 6000 IO’s per second.

With an HDD drive, the I/O performance steadily raises the more you apply the drive. Even so, as soon as it gets to a specific restriction, it can’t proceed speedier. And due to the now–old concept, that I/O limitation is much below what you can find with an SSD.

HDD can only go as much as 400 IO’s per second.

3. Reliability

SSD drives don’t have any sort of moving components, which means there is much less machinery inside them. And the fewer actually moving elements you’ll find, the fewer the possibilities of failing are going to be.

The standard rate of failure of an SSD drive is 0.5%.

As we have already noted, HDD drives rely on spinning hard disks. And anything that employs a great number of moving parts for extented time frames is prone to failure.

HDD drives’ average rate of failure can vary somewhere between 2% and 5%.

4. Energy Conservation

SSD drives are much smaller than HDD drives and also they don’t possess just about any moving parts at all. As a result they don’t generate as much heat and need a lot less energy to function and much less energy for chilling reasons.

SSDs use up between 2 and 5 watts.

HDD drives are known for becoming loud; they can be liable to heating up and in case you have several hard drives in a web server, you need a further cooling device exclusively for them.

As a whole, HDDs take in between 6 and 15 watts.

5. CPU Power

The swifter the data access speed is, the quicker the file requests will likely be handled. This means that the CPU do not need to reserve resources waiting around for the SSD to respond back.

The common I/O wait for SSD drives is just 1%.

When you use an HDD, you will need to spend extra time waiting for the outcomes of one’s file query. This means that the CPU will stay idle for extra time, looking forward to the HDD to react.

The average I/O delay for HDD drives is approximately 7%.

6.Input/Output Request Times

The vast majority of our completely new web servers are now using exclusively SSD drives. All of our tests have shown that utilizing an SSD, the normal service time for an I/O request although operating a backup continues to be under 20 ms.

With the exact same web server, but this time loaded with HDDs, the effects were different. The regular service time for any I/O call fluctuated between 400 and 500 ms.

7. Backup Rates

Speaking about backups and SSDs – we have detected a significant development with the back up rate since we transferred to SSDs. Right now, a usual web server back–up takes merely 6 hours.

We used HDDs exclusively for a couple of years and we’ve very good understanding of how an HDD runs. Backing up a server designed with HDD drives can take about 20 to 24 hours.

Our Linux hosting packages accounts include SSD drives automatically. Be a part of our family here, at a4host, to see how we can assist you boost your site.


  • Service guarantees

  •  
  • a4host’s Virtual Private Servers come with no installation rates and function in a steady network delivering 99.9% of uptime. Full root/administrator access guaranteed.
  • Compare our prices

  •  
  • Have a look at our price list and select the ideal Virtual Private Server for your powerful web sites. You’ll be able to upgrade to a more feature–rich VPS configuration with a mouse click.
  • Compare our hosting plans
  • Contact Us

  •  
  • You’ll be able to get in contact with us night and day by email or by utilizing our super–fast ticketing platform. a4host offers a 1–hour reply time guarantee.